Huawei is preparing to release a smartphone Huawei P30. Both Huawei P30 and P30 Pro leaked several times on the internet and based on these leaks, Youtuber Waqar Khan developed the concept of rendering the Huawei P30 Pro.
As mentioned earlier, the rendering concept is consistent with previous leaks and reveals what you can expect from a mobile phone design. It is expected that the smartphone will have a narrow bezels on the sides and a thin chin at the bottom.
At the top of the screen there is a waterdrop notch. The screen is curved to the sides to offer higher screen-to-body ratio. The device is expected to come with a in-display fingerprint sensor and the power button and volume control are on the right.
On the back of the phone, there are four vertically aligned camera sensors. The sensor is accompanied by a dual-tone LED flash. The camera module is located in the upper left corner, and there is a Huawei branding at the lower left corner.
According to the previous report, Huawei P30 Pro’s only three of the four cameras are available for shooting. The fourth is the ToF (Flight Time) camera used to 3D face scanning and modeling. One of the sensors of the Huawei P30 Pro is a telephoto lens with 10x optical zoom.
